Tuesday, December 29, 2009

OK, my faucet is dripping. Now what do I do to fix it?

Water conservation always translates to money savings. 



When you see a drip at a faucet you are seeing money go down the drain. One seemingly minor dripping faucet can lead to hundreds of gallons of water loss per month. Did you know a home's sink faucet dripping 1 drip per second looses 5 gallons/day and 2,082 gallons/year. When a drip develops it’s very important to have it fixed immediately. Dripping faucets are often caused by the cracking and failed rubber seal in the fixture. In some cases this rubber seal can easily be replaced.  When you go to the hardware store, you will have to know the faucet manufacturer or bring in the old washer to match it up. If you feel confident, you can try this repair but is plumbing is not your skill, we recommend hiring a plumber to correct this problem. If you do hire a plumber, it might be best to simply replace the faucet instead of fixing it.  It's going to cost you a couple hundred dollars for the plumbers time.  If you do attempt this repair or any plumbing for that matter, always be sure to turn off the water supply.


Frequency: When necessary
Difficulty: Requires some know-how
Completion Time: 15 minutes


Regardless of they type of house you have, there are some necessary tasks you will have to do stay on top of things.  Learn more and keep up with your house with a free My Healthy House.com profile.  Stay tuned and make your house the best it can be.  


If you have any comments or suggestions on how this blog can be improved including suggested articles or constructive criticism, please send us feedback.



© Healthy House, Inc. 2009





Avoid frozen plumbing pipes

Don't wake up to a flood!

Every winter thousands of homeowners have the unpleasant experience of ruptured plumbing pipes. In most cases this nightmare is completely avoidable. When the outside temperature drops below 32 degrees Farenheit (0 degrees Celsius), and when plumbing supply lines aren’t properly protected, the water in the pipes freezes and expands bursting the pipe.  This can happen to copper, galvanized steel or even plastic piping.  


So what can you do to protect you house? The best defense is ensuring that all exposed and visible water supply lines and exterior faucets (hose bibs) are properly insulated. Most houses have either a pier-and-beam or slab foundation. For houses with a pier-and-beam foundation, the supply lines are often underneath the house and not insulated properly. 

Tubular pipe insulation works well and is easy to install.  There is even a split type with a self-adhesive strip.  The tape can be pulled off and the tube closed by simply pressing the adhesive ends together. This material comes in long lengths and can easily be cut to fit.  In addition, all exterior faucets should be covered with a foam insulating cover, which can be found at most hardware stores. For houses on a slab foundation, insulating the water supply lines under the house is not possible or necessary.  Simply make sure that the exterior faucets are properly insulated. An alternate to insulating lines is to let the lines drip at the faucets just slightly. This relieves pressure off the line but may not help in excessively low temperatures.  The other problem with letting the faucets drip is that they're typically forgotten wasting gallons of water.



Frequency: Before a freeze is expected or by October in most areas.
Difficulty: Easy
Tools Required: Two hands
Completion Time: 10 minutes or a few hours depending on the type of foundation


Regardless of they type of house you have, there are some necessary tasks you will have to do stay on top of things.  Learn more and keep up with your house with a free My Healthy House.com profile.  Stay tuned and make your house the best it can be.  


If you have any comments or suggestions on how this blog can be improved including suggested articles or constructive criticism, please send us feedback.



© Healthy House, Inc. 2009





How do I drain my home's water heater tank?

So easy a homeowner could do it!


If you have a conventional tank type water heater, chances are you have never flushed the tank. Most people don’t probably because they thing it is difficult. Flushing your water heater removes build-up of sediment, which shortens the life span and efficiency of the unit. To drain the unit, refer to the manufacturer’s instructions. If you can’t locate the manual, here are the steps for draining most water heaters:

  1. For gas units, turn the unit’s thermostat to the pilot position so you don't have to relight the pilot.  For electric units turn the unit off at the main electrical disconnect. This is either in the water heater closet or at the main or sub electrical panel.
  2. Shut off the cold water supply. This is usually a valve with a handle located on the water line above the tank.
  3. Attach a garden hose to the drain valve (which looks somewhat like an water faucet) at the bottom front of the water heater. Be sure this hose terminates at the outside of the house.
  4. Open a hot-water faucet anywhere in the house to prevent a vacuum from forming in the lines preventing water from draining from the tank.
  5. Open the drain valve and check the color of the water coming out of the end of the hose. At first the water may be orange, brown or otherwise dirty. BE CAREFUL, the water will be very hot.
  6. Once the water coming out of the end of the hose looks clear, shut off the drain valve, turn off the hot water faucet in the house, and turn the main cold water supply line back on.
  7. For gas units you can set the thermostat back to the desired heat, and for electric units you can turn the power back on.
The average residential water heater tank holds 40 gallons. In most cases you don’t need to drain the entire tank, just a few gallons. Make sure the hose terminates to the outside of the house or you will have a mess to clean up.


Frequency: Annually
Difficulty: Easy
Tools Required: Garden hose
Completion Time: One hour


Regardless of they type of house you have, there are some necessary tasks you will have to do stay on top of things.  Learn more and keep up with your house with a free My Healthy House.com profile.  Stay tuned and make your house the best it can be.  


If you have any comments or suggestions on how this blog can be improved including suggested articles or constructive criticism, please send us feedback.



© Healthy House, Inc. 2009





Monday, December 28, 2009

How to stop your A/C primary drain from a catastrophy!

Clogged primary drains result is substantial damage!

Understanding how your A/C works is a important knowledge for all homeowners.  One of your A/C system's main duties is to remove the moisture from the living space. Once the A/C's evaporator coil removes the humidity from the air, it drains the moisture through a primary drain line to either the exterior of the house or into a drain under a bathroom sink.  In some rare cases, the primary drains into a sump pump in the return plenum.  As long as the A/C is working, the primary drain line should be running water.

Mold is the primary culprit.  Often, the primary drain line gets clogged with mold spores circulating in the air.  Since the environment inside the primary drain is perfect for mold to grow and clog the line, it happens time and time again.  The result is an overflow either to a secondary emergency system or onto the floor or ceiling causing expensive and catastrophic effects.  

There is a way to prevent this damage.   Educated homeowners know that by pouring about a cup of bleach into the beginning of the primary drain line they can prevent problems.  The bleach will drain through this gravity feed tube and kill all the mold that is growing inside the line.  Failure to do this does not necessarily guarantee a overflow but the chances are greatly increased if this maintenance task is not completed a couple of times a summer.

Some systems have a secondary emergency system others do not.  Depending on they type of system you have (horizontal or vertical) you may have a secondary system that kicks in if the primary drain does overflow.  A secondary system can be another drain that terminates to the exterior (over an eave or soffit) or there could be a overflow kill switch in place that turns off the compressor if an overflow occurs.


A vertical system has the coil above (see gas unit to left) or below (see electric unit to right) the furnace/air handler.  There is usually no emergency system in place for this orientation so having a shutoff switch installed in the primary or secondary drain is a very great idea.  With no emergency system in place, if the primary drain overflows, the water has no where to go but into the return plenum and across the slab.  Carpet and wood can be destroyed in a matter of minutes. Hence the installation of an overflow kill switch in the primary (or secondary) drain is a great improvement.



Horizontal systems are usually located above ceilings and typically have an emergency overflow pan located under the coil.  The secondary system usually starts from the coil as a short drain line that elbows down into the emergency overflow pan.  It is usually located next to the primary drain but about a quarter inch higher.  If the primary drain clogs, the water in the coil rises over the primary pan and flows out the secondary elbow in to the pan.  The drain pan should allow water to drain to the exterior over a window, door or highly visible area for the homeowner to notice there is a problem.  Overflow kill switches located in the pan are also allowed in most cases instead of a physical drain line but use of both the drain line and the switch are better.



As a important improvement, each coil should have an optional overflow kill switch installed in the primary or secondary drain line to prevent the catastrophic failure of the primary drain system.  These are easily affordable as an improvement and will save you hundreds of dollars in flooring or ceiling repairs.  They're easy to install but it is recommended that you have your HVAC contractor install them since the overflow kill switch has to be connected into your HVAC system's thermostat control wires to work properly.   Cost for an improvement like this is around $100 for each A/C system and should be done in conjunction with an annual cleaning and service call.



If the secondary system does drip water under an eave area (or in plain sight-see left image) or the overflow kill switch is activated, you will need to contact your HVAC contractor right away to clear the primary drain line.  The clog usually has to be blown out with compressed air.  Don't wait for this to be a problem for you.  Clear the line each summer in May and July by pouring about a cup of bleach at the beginning of the primary drain line.  Understand and know your HVAC system so you can properly care for it and reduce your expenses in it's operation and repairs.



Regardless of they type of house you have, there are some necessary tasks you will have to do stay on top of things.  Learn more and keep up with your house with a free My Healthy House.com profile.  Stay tuned and make your house the best it can be.  


If you have any comments or suggestions on how this blog can be improved including suggested articles or constructive criticism, please send us feedback.



© Healthy House, Inc. 2009